Be Quiet! Dark Power Pro 13 Full Modular Power Supply, 1600W Power, 80 Plus Titanium Efficiency, 135mm Silent Wing Fan, 12V Rails, Full bridge + LLC + SR + DC/DC Technology, Black
- Dark Power Pro 13 1600W Power Supply
- Cutting Edge Technologie and Performance
- The be quiet! Dark Power Pro 13 1600W offers 80 PLUS® Titanium efficiency, world-class performance and ATX 3.0 compliance for next-gen GPU compatibility.
- Features
- 80 PLUS Titanium efficiency (up to 94.5%)
- Handles massive power excursions
Warranty: 1 Year — effortless warranty claims with UK-wide coverage. Learn more
Key specifications
- Color
- Black
- Power
- 1600 W
- Modular
- Full Modular
- Efficiency
- 80 Plus Titanium
- Form factor
- ATX
Details
- Shipping Weight
- 6.40 Kg
- Shipping Dimensions
- 15.00 cm x 42.00 cm x 25.51 cm
- PFC
- Active
- Fanless
- No
- Length
- 200 mm
- Main Connectors
- 1 x 24 pin (20+4) ATX
- EPS/CPU Connectors
- 2 x 8 pin (4+4) EPS (CPU)
- SATA Power Connectors
- 16
- Molex Connectors
- 5
- PCIe 6-Pin Connectors
- 0
- PCIe 6+2-Pin Connectors
- 6
- PCIe 8-Pin Connectors
- 0
- PCIe 12-Pin Connectors
- 0
- PCIe 12+4-Pin 12VHPWR Connectors
- 2
- Continuous power (W)
- 1600
- Peak power (W)
- 1700
- Form factor EPS 12V
- Version 2.92
- Topology
- Full bridge + LLC + SR + DC/DC
- Digitally controlled
- ✓
- Voltage (Vac)
- 115 - 240
- Frequency (Hz)
- 50 - 60
- Input current (A)
- 15 / 9
- Power factor at 100% load
- >0.99
- Modern standby
- ✓
- Average life time (h / 25°C)
- >100000
- Operating temperature up to (°C)
- 50
4.711 reviews
Got something to share?
Rate this product — your experience helps other buyers.
Poppy S. Used for: 3–6 months
Pros
Deliberately oversized, so it sits in its most efficient band
Comment
Sixteen hundred watts of TITANIUM in a build that will never draw half of it, which is deliberate. The efficiency curve is flattest around a third load, so a big supply in a modest machine is the quietest and coolest option. Wall meter agrees: 310W at the socket for a machine reporting 293.
Oscar M. Used for: More than a year
Cons
Proprietary connectors, so keep the original cables
Comment
Silent from the day it went in, and it has stayed silent. Do not lose the cable bag
Jack N. Used for: 1–3 months
Comment
Every build I do now gets a be quiet! supply and this is the best of them. The wall figure barely moves off what the machine says it is drawing, and the case stays cool.
Isla M. Used for: 6–12 months
Pros
The fan has genuinely never started
Cons
Absurd overkill for a single card
Comment
A 1600W TITANIUM supply in a machine that peaks at 600W sounds daft, and it is, but the payoff is that the fan has never started. Not once! The other benefit nobody mentions is that the unit runs cool enough that the bottom of the case does not act as a radiator any more.
Noah L. Used for: Less than a month
Pros
Native 12V-2x6 that seats with a solid click
Cons
Very deep unit
Comment
Fitted, booted, silent. The 12V-2x6 lead is proper thick gauge and clicks in reassuringly
Ella S. Used for: 1–3 months
Pros
The overclocking key genuinely changes how it behaves under a spiky load
Comment
The overclocking key is the feature nobody talks about and it is the reason I picked this over the Corsair. Flip it and the unit goes from multi rail with per rail OCP to a single big 12V rail, which matters if you are running one card that spikes hard. The fan is a Silent Wings and it shows. It does not turn at all below about 400W, and above that it is a soft rush I cannot pick out from the case fans. One star off for the depth. It is 200mm and the 24 pin comes out of the end rather than the top, so budget for that. Six weeks in and the fan has started perhaps twice.
Arthur L. Used for: 3–6 months
Pros
Lives up to the brand name
Cons
Cost me a drive cage
Comment
Quiet as promised but a big lump, and my drive cage had to come out to fit it.
Freya M. Used for: 6–12 months
Comment
The machine it powers lives on a desk in a room where I record voice work, and the microphone does not pick it up. That was the whole requirement. It also has more PCIe leads than I need, six, which is generous for one card!
Theo M. Used for: 6–12 months
Pros
Frameless fan is off below any load a single card build makes
Comment
Quietest supply I have owned and I have owned a few. The frameless fan design means there is no ring of plastic to make turbulence, and at the loads a single card build produces it is simply off. Where it loses a star is the cables. They are the sleeved sort, which is good, but be quiet! use their own connector layout at the PSU end, so the leads from my old Dark Power unit did not fit. Not a problem if you use what is in the box, a real annoyance if you assumed otherwise. Efficiency is as claimed. A machine reporting 400W internally draws 424W at the socket, which for TITANIUM at low load is exactly right.
Freya B. Used for: 3–6 months
Comment
This is the supply for people who care more about noise than lights. There is no display, no RGB, nothing to configure, and the finish is a matte black that disappears in a case. What you get instead is a fan that does not turn until the machine is genuinely working, and even then never rises to a pitch you can identify. My machine has a 5070 Ti and a 9700X, and I have never once been able to say the noise I am hearing is the power supply. Rails are steady, no whine, no click, no heat! Four months of that and I still cannot hear it.
Willow P. Used for: 3–6 months
Pros
Killed the transient reboots my old GOLD unit caused
Cons
Deep, heavy, and it will not take another brand's cables
Comment
Came to this from a mid range GOLD unit after the machine started rebooting during shader compilation in a couple of games, which is the classic sign of a supply that cannot cope with a transient. The problem vanished the first evening and has not come back. Whatever be quiet! do with the capacitors on this thing, a 5090 dumping load in a millisecond does not move it. I have watched the socket meter jump from 140W to over 800W between one reading and the next. The other thing worth paying for is the noise floor. The fan is off at anything under a serious render, and there is no coil noise at any frame rate, capped or uncapped, which was not true of the unit it replaced. Downsides: it is deep, it is heavy, and the connectors at the PSU end are the brand's own, so old cables are useless. Five months on and the reboots have not come back once.
