
Warranty: 1 Year — effortless warranty claims with UK-wide coverage. Learn more
Rate this product — your experience helps other buyers.
Used for: More than a year
Temperatures have not drifted at all
Tall block, check your glass panel clearance
Went in as part of a full rebuild and has outlasted two graphics cards since. The cooling has never been the question. A 12900K under a long export sits at about 40 over ambient with the fans around 1200, and it has not drifted upward in two years, which I take as a good sign about the pump. What costs it a star is the block height. With the cover plate on it is tall, and in my case the tempered glass side panel clears it by a whisker. Anyone with tall memory and a narrow chassis should measure. Also the ARGB header cable is short enough that routing it neatly took longer than mounting the radiator.
Used for: More than a year
Deepcool's control software is heavier than it needs to be
Still running the same fan curve I set on day one and it has not needed a thought since. Package hovers in the seventies with a 5800X3D under load, idle is silent, lighting still even across all three fans a year and a half later. The software is the only thing I would change, and I simply stopped using it.
Used for: 3–6 months
Enormous drop over the boxed cooler
Fan hub takes up a drive bay space
Replaced a stock AMD cooler and the machine went from audible across the room to something I have to check is on. Temperatures under load dropped from the mid nineties to the low seventies, which is a bigger jump than I expected!
Used for: 1–3 months
Good cooler let down slightly by its own software. The fans and the pump are excellent, no noise at any speed and my 7700X does not go past 76 under Cinebench. But the lighting app wants an always running service, refuses to talk to the motherboard sync properly, and reset my profile twice after a Windows update. I control it from the board now.
Used for: 1–3 months
Tubes want a wide bend or they kink at the block
Bought it for a red and black build and the plate on the block is the reason. You can print your own or use one of the ones in the box, and it changes the whole look of the machine from above. Underneath the styling it is a straightforward 360 that keeps a 14600K in the sixties while gaming and is quiet doing it. The pump had a couple of gurgles on the first boot and then went silent.
Used for: 1–3 months
Magnetic cover plate you can actually swap
Block is chunky next to tall memory
The swappable cover on the block is not a gimmick if you have a themed build. Printed a replacement plate the week it arrived and it snaps on magnetically. Cooling is quietly competent underneath all that!
Used for: More than a year
Survived a case swap with all its hardware intact
Second winter with this cooler and it has been completely uneventful, which is what you want. It went on a 5900X, has been through a house move and a case swap, and both times went back together without any fuss because the mounting hardware is all captive and nothing needed replacing. Still holds the same temperatures it did when it was new after a year and a half, low seventies under a full load!
Used for: Less than a month
Cold, quiet, and the top plate lifts off with a fingernail if you want to change it. Nothing here I would change yet
Used for: 3–6 months
Boringly reliable and quiet
Block lighting is dimmer and pinker than the photos
Four months in and the honest summary is that it is very good at the boring parts and merely fine at the flashy ones. Temperatures are excellent, noise at idle is nothing, and the pump has been steady. The lighting though is dimmer than the photos and the diffuser on the block washes the colour out, so my red comes out closer to pink than I would like.
Used for: Less than a month
Fast fit, and the cover plate matches the build
Snapped together in twenty minutes and the plate matches my case badge exactly